Smart Baby Watch SMS commands list

You can send SMS commands to the watches from any phone.
Default factory password: 123456 or sometimes 523681.
PHONE NUMBER is starting with “+” and with your country code. eg for USA +12223334455
All SMS commands should never have gaps!
The main requirement is a 2G SIM card (it’s normal, standard, for trackers, Internet gadgets and other epithets), and not newfangled for 3G / 4G networks and 4G / LTE smartphones. In some regions there are operators that do not have networks in the 2G band.
___________________________________________

Set your primary Parent’s phone number:
pw,123456,center,phone number#
Where phone number is a Parent’s phone number starting with “+” and with your country code. eg for USA +12223334455

Set an additional Parent’s phone number:
pw,123456,slave,phone number#

Delete Primary Parent’s Number:
pw,123456,center,d#

Delete additional Parent’s number:
pw,123456,slave,d#

Set SOS numbers:
pw,123456,sos1,phone number#
pw,123456,sos2,phone number#
pw,123456,sos3,phone number#
Where phone number is a Parent’s phone numbers starting with “+” and with your country code. eg for USA +12223334455

Delete SOS numbers:
pw,123456,sos1#
pw,123456,sos2#
pw,123456,sos3#

Set dial numbers for buttons 1 and 2:
pw,123456,tel1,phone number#
pw,123456,tel2,phone number#
Where phone number is a Parent’s phone number starting with “+” and with your country code. eg for USA +12223334455

Delete numbers from buttons 1 and 2:
pw,123456,tel1#
pw,123456,tel2#

Location update interval in seconds:
pw,123456,upload,50#
Where 50 is the interval in seconds. This interval is recommended for continuous work of about 8 hours before battery recharge is needed.

Wiretapping – the watch will call back to the specified number and turn on the microphone:
pw,123456,monitor,phone number#

Set language and time zone:
pw,123456,lz,0,3#
Where 0 = English language, 3 = GMT+3
0:English,
1:Chinese,
3:Portuguese
4:Spanish
5:Deutsch
7:Turkiye
8:VietNam
9:Russian
10:Francais

Find watches indoor:
pw,123456,find#

Reset to factory settings:
pw,123456,factory#

Return the watch to SeTracker application:

Europe and Africa region:
pw,123456,ip,52.28.132.157,8001#
pw,523681,ip,52.28.132.157,8001#
One of these commands will switch the watch to SeTracker Europe.

Asia and the Pacific
pw,123456,ip,54.169.10.136,8001#
pw,523681,ip,54.169.10.136,8001#
One of these commands will switch the watch to SeTracker Asia and the Pacific.

North America
pw,123456,ip,54.153.6.9,8001#
pw,523681,ip,54.153.6.9,8001#
One of these commands will switch the watch to SeTracker North America.

South America
pw,123456,ip,54.207.93.14,8001#
pw,523681,ip,54.207.93.14,8001#
One of these commands will switch the watch to SeTracker South America.

Hong Kong
pw,123456,ip,58.96.181.173,8001#
pw,523681,ip,58.96.181.173,8001#
One of these commands will switch the watch to SeTracker Hong Kong.

After the watch switches to SeTracker, it will stop sending location to KidControl.

Check all parameters:
pw,123456,ts#

Reboot:
pw,123456,reset#

Setting a new password only from the primary phone number:

pw,888888#
Where 888888 is the new six-digit numerical password